Description

Advantages Waterproofing Chemicals Services Faster waterproofing and no any breakage. There won’t be any collection of heap of sand or cement around the house buildings. There won’t be any dust at all during the work. There is no need to spray water during and after the work. Do not need to worry about any increase in weight of your building In summer there won’t be no any cracks and joints on your surface as the silicon waterproofing chemicals is a Crack-free material. remove all moss, fungi and algae by using wire brush/water jet. Allow the substrate to dry. Ensure the roof slope of a minimum of 1 in 100 already provided. Substrate must be sound. Hairline cracks up to 5mm width should be undercut for ease of application and filled with flexible crack filler. Any loose cracks must be removed electric cutter. Any hollow present in the substrate must be repaired with UltraTech stucco. Allow the repaired area to cure with clean water/moist cure as usual. Surface should be in SSD Condition for application of UltraTech Super Stucco 1.b To ensure proper adhesion, surface should prime with a single coat of Dr.Fixit, Raincoat dilute with water in the ratio 2:1 and apply 1.c Apply 1st coat of Dr.Fixit, Raincoat without dilution spreading @ the rate of 0.70/L/Sq.m/Coat. Allow to dry 1st coat for 24 hrs. Apply 2nd coat of Dr.Fixit, Raincoat without dilution Spreading at the rate of o.70/L/Sq.m/Coat to achieve total dry film thickness of 850/1000 microns at forced the coverage at the rate of 1.40/L/Sq.m in 2 coats. Ensure there are no air bubble and pin holes on the coating. In comparison to other waterproofing our cost is cheaper.